Package:
Case
Size:
/
Model Number:
61012004
Brand Name:
WHDZ
Application:
Household Tool Set
DIY Supplies:
Electrical
Type:
Combination
Type:
Slide Hammer - Glue Stick - PDR Glue Puller with Glue Tabs
Product Dimensions:
9.8 x 5.1 x 2.7 inches
Black Glue Stick: :
10mm*220mm
glue tabs:
silver aluminum tabs
Type:
Hand Tools
Number of Pieces:
1set
function1:
slide hammer
function2:
dent puller
fucntion3:
car repair tool
function4:
PDR tools
function5:
body repair tool
Paintless Dent Repair Tools Slide Hammer Car Body Dent Puller Removal Set with 4pcs PDR Glue Puller Tabs Aluminum Suction Cups
Product Description:
- Professional paintless dent repair tools hail damage repair kit,perfect for door dings and hail damage
- WHDZ PDR Tools are made from several types of Stainless steel. Tempered high carbon Stainless steels and standard stainless steel are used depending on the design of a particular tool
- Slide hammer Puller maximum pulling power for the small dents; Different size puller tabs perfect for the dent remove
- Working with 4 Size Aluminum Glue Puller Tabs, Suitable for the dent of all kinds of flat metal ,such as auto¡¢washing machine's ¡¢doors and refrigerator
- We are professional manufacturer and honest sellers,focus on quality is second to none.And we protect the right of the customers.We also accept return if you are not satisfied with your purchase,which seldom happen. Let's get them bought for your lovely cars.
Packing include :
1- Slide Hammer
4- Glue Taps
Introduce：
1.Clean the dent with a clean wet cloth;
2.Mount the glue stick into the glue gun,pull the trigger to let the glue stick enter into the glue gun, connect the power source and preheat for 5 minutes;
3.Use a proper drawing gasket. Large dent requires a large drawing gasket. (Note: The larger the drawing gasket is, the larger the drawing force is);
4. Pull the trigger and apply the drawing gasket with extruded glue (The 4 holes of gasket should be applied with hot melt glue);
5. Fast place the drawing gasket with hot melt glue at the center of dent, press lightly until the glue cures and adheres (Let the glue cool for about 8 minutes. The cooling time should be less than 10 minutes and should be shorter slightly in winter);
6. Align the T-shaped repairer and press the drawing gasket with hot melt glue, pull the sliding rod backwards to pull up the dent;
7. Check with a Line board. If dent still exists, knock it slightly with a flattening hammer or pen;
Service:
>Warranty
We provide 12 months warranty !
We promise the products which have any quality problems can be replacement within
Warranty.
>Reliability
Alibaba VIP approved. All products 100% full test before shipping out.
>Information
We will reply you as soon as possible, even small questions.
>After service
We have full confidence in our products' quality,any problem ,will replace a new one
for you.
We try our best promote our products' quality and range to fit the customer require.
Unit Type:
Set
Package Weight:
1.5kg (3.31lb.)
Package Size:
40cm x 15cm x 8cm (15.75in x 5.91in x 3.15in)